HYDRAULIC CYLINDERS FOR
AERIAL WORK PLATFORMS

Our aerial platform cylinders support safe, controlled motion on scissor lifts, boom lifts and cherry pickers. Each cherry picker hydraulic cylinder is configured for the required stroke, mounting, leveling and outdoor protection.

Home

Applications

Indoor & Outdoor Aerial Work Platforms

INDOOR & OUTDOOR AERIAL WORK PLATFORMS

Applied on scissor lifts, scissor-lift aerial work, telescopic booms, mast lifts, vehicle-mounted aerial platforms and stage-lifting equipment. Cylinders drive lifting, telescoping, leveling and luffing — directly tied to operator safety.

Articulating Boom Lift

Scissor-lift Aerial Work

Telescopic Boom

Mast Lift

Scissor Lift

Articulating Boom

Telescopic Boom

Mast Lift

KEY CHALLENGES

High Extension Ratio

Cylinder failure threatens life — must comply with EN 280 / ANSI A92.20 / ISO 16368.

Anti-burst / Anti-stall

Counterbalance or pilot-operated check valves are mandatory to lock under hose burst.

Fine Control Accuracy

Positioning at altitude requires mm-level micro-motion, low internal leakage and zero start-up jerk.

High Extension Ratio

26m+ telescopic booms need cylinder extension ratios ≥ 4:1.

Lightweight Design

Scissor models demand thin-wall barrels and optimal material usage.

OUR SOLUTIONS

100% static pressure test at 1.5× working pressure + sample burst test at 1.43× design pressure before shipment.

Integrated counterbalance valves (Sun / Taizhong / Hydaul) — CE Module B+D ready.

"Long guide + dual seal + damping groove" design, micro-motion start pressure ≤ 0.5MPa.

2/3/4-stage telescopic options, max stroke up to 18m.

30CrMo / 35CrMo high-strength barrels balancing weight and pressure capability.

RECOMMENDED PRODUCTS

Learn More

HYDRAULIC CYLINDERS FOR AERIAL WORK PLATFORMS

KEY CHALLENGES

OUR SOLUTIONS

RECOMMENDED PRODUCTS

HYDRAULIC CYLINDERS FOR
AERIAL WORK PLATFORMS