Which port machines can use these cylinders?
Applications can include container handlers, reach stackers, mobile harbour equipment, cranes, ship loaders and stabilizing systems.
A port machinery hydraulic cylinder can power lifting, luffing, steering, stabilizing and attachment motion on cargo-handling equipment. The correct configuration depends on the load case, stroke, installed dimensions, mount geometry, hydraulic pressure and duty cycle. Salt-laden air, rain and washdown exposure should also be stated before seals and surface protection are selected.
Confirm the operating load and installation interfaces before selecting a bore or stroke.
| Category | Requirements | Purpose |
|---|---|---|
| Equipment and motion | Machine model, cylinder function, attachment, motion range and cylinder quantity | Defines the mechanism and load direction. |
| Load and pressure | Rated and peak load, working and peak pressure, flow and required margin | Supports force and stability review. |
| Stroke and lengths | Stroke, retracted and extended reference lengths and installation envelope | Confirms travel without collision or bottoming. |
| Mounts and connections | Mount type, pin or flange dimensions, rod end, ports and hose clearance | Ensures the cylinder fits the structure and circuit. |
| Marine environment | Salt exposure, rain, washdown, temperature, fluid and service interval | Guides corrosion, sealing and rod-surface discussion. |
Send the assembly drawing, load case and hydraulic schematic. We review pin alignment, side-load risk, port access, hose movement and installation clearances together with the required corrosion protection. Replacement inquiries should also include the existing part number, measured interfaces and clear installed photographs.
Applications can include container handlers, reach stackers, mobile harbour equipment, cranes, ship loaders and stabilizing systems.
State the salt, rain and washdown exposure, service interval and coating requirement. These conditions are reviewed with the rod surface and sealing system.
Provide bore, rod diameter, stroke, closed and extended lengths, mount and pin dimensions, port details and the available installation envelope.
Only when the load case, geometry, pressure, mounts, ports and environment are confirmed equivalent. Machine model alone is not enough.